IPX DDK-1000 - Manual (Page 100)

ARP and ping from UNIX or GNU/Linux:
1.
Start a shell
2.
Type the following as superuser (root):
arp -s <IP address> <Ethernet address>
[or arp -s <IP address> < MAC address>]
ping <IP address>
Example:
arp -s 192.168.1.100 00-0C-0C-00-00-01
ping 192.168.1.100
The device responds to the ping in the examples above if the new address was configured. Note,
this method will set the IP address permanently.
Note: The default account and password after the reset are root and Admin.
98