IPX DDK-1000 - Manual (Page 45)

Change the System Setting — Update Firmware.
ick the Update Firmware button on the left side of the “Date and Time” page to enter the “Update
Firmware” page.
Please follow the steps below to change the Audio Mechanism through the network if necessary.
1. Cl
. Click the “Browse…” button to select the UPDATE.BIN file which was copied into your computer.
3.
4.
Note ile the unit is updating itself.
Note is fit in with the model of the unit. Updating
sical damage to the device.
2
Click the “Update” button.
DO NOT power off the Ipxcam while this update process is running.
: Don’t interrupt the process wh
: Please make sure that the UPDATE.BIN file
with the wrong UPDATE.BIN file may cause any phy
43