IPX DDK-1000 - Manual (Page 56)

Test: Go to the Internet.
. Set your PC to enter the Internet.
browser
→ Type in the Ipxcam IP address (the same address as in the
.
1
2. Desktop
→ IE
PPPoE settings and step 3 above)
→ You can see the Ipxcam images
DD
1. m’s IP address ( Scan IP software or monitor )
→ open your IE browser →
→ Choose the network →
n”
→ Click “OK” .
2.
3.
Not amic IP configuration. If your
onfiguration is fixed (true IP), you don’t need to proceed with the PPPoE and DDNS
ettings. The DDNS is just for your convenience.
NS settings
Check your Ipxca
Use the address to connect to the Ipxcam or view the images
Type in “User name : root” and “Password : Admi
Choose the “DDNS”
→ Click “Enable DDNS” → Enter the “DDNS host name”, for example
“abc123. homeip.net”
→ Type in “DDNS Account”, for example “abc123” → Enter the “DNS
Password”, for example “7777”
→ Submit → The settings are now complete → Close the IE
browser.
Open the IE browser again
→ Type in the Website address you just applied for, such as
“abc123.homeip.net”
→ You can look at your Ipxcam images right away. The procedure is
complete.
e: These settings are only for your ADSL Dyn
c
s
54