IPX DDK-1000 User Manual
Page 51
Change the Application Setting — Alarm Application Enable Setting.
1. Click
the
Enable Alarm button on the left side of the record to enter the “Alarm Application
Enable Setting” page.
Please follow the steps below to change the setting via the network if necessary.
and activate the function
2.
Click “Enable Alarm – Trigger an Alarm When Ethernet Is Lost” to checkmark the attached box
.
ttached box and activate the
4.
Enter the "Alarm Duration" you have chosen.
5. Click
the
Submit button to submit the new setting of the recording.
turn to the home page.
3.
Click “Enable Alarm – Save Into SD card” to checkmark the a
function.
6. Click
the
Home button to re
Description of function keys:
Enable ALARM – Trigger an Alarm When Ethernet Is Lost: Activates or deactivates the alarm
ring while the Ethernet lost.
trigge
En
D card: Activates or deactivates the alarm recording to be saved to the
able Alarm – Save Into S
SD card.
Alar
Predetermines the length of the alarm.
m Duration:
49