Andrew James AJ000256 Electric Cultivator/Tiller - Manual (Page 10)

10
Starting
Connection the mains (Fig. 3)
1. Plug the appliance connection line into
the safety switch/plug combination and
secure it with the cable relief.
2. The loop of the mains wire must be
long enough for the cable relief to be
able to slide from one side to the other.
Starting up (Fig. 4)
1. Press the safety lock button A of the
switch/plug combination and then pull
the trigger level B against the bar. The
motor will start and the tines will begin
to rotate.
2. Hold the switch until it releases the
safety lock button.
3. To stop the appliance, release the
trigger lever.
4. Use the tiller for breaking sod,
preparing seedbeds and for cultivating
gardens and flower beds. The tiller can
also dig small holes for planting saplings
or potted plants.