Andrew James AJ000256 Electric Cultivator/Tiller - Manual (Page 8)

8
Electrical safety

The mains voltage must correspond to the one marked on the technical data
plate (230V~50Hz). Do not use other sources of power.

The use of a safety circuit-breaker is recommended for the power supply line
for an intervention range of 10 to 30 rated mA. Consult a reliable electrician.

Never pass the appliance over any extension cable as this could cut the
cable. Make sure you always know where the cable is.

Use the special cable holder when connecting the appliance to an extension
cable.

Never use the appliance when it is raining. Try to prevent it from getting wet
or being exposed to humidity. Do not leave it outside overnight. Do not cut
damp or wet grass.

The power supply cable should be checked before using the appliance and
regularly after use to ensure the cable is not damaged. If the cable is not in
good condition, do not use the appliance; take it to an authorised service
center instead.

Only use an extension cable that is suitable for outdoor work. Keep it away
from the cutting area, from damp, wet or oily surfaces or any where with
sharp edges.

The mobile socket of the extension cable should be splash proof in
compliance with DIN 57282 and VDE 0282 regulations; the cross-section of
the wire (max. length 75 m) should be at least 1.5 mm
2
. Use H07RN-F
harmonized cable