Andrew James AJ000582 Garden Shredder with 45 Litre Collection Bag User Manual
Page 5
5
Assembling the appliance
1.
Turn the appliances main body on its head.
2.
Insert the axel through both of the holes located on the foot. (Fig 3)
3.
Place a spacer onto either end of the inserted axel.
4.
Insert the wheels onto the axel. Ensure that the wheels are inserted the correct way so
that the outsides of the wheels can fit the wheel cover. (Fig 5)
5.
Place a spacer into the inner wheel and insert the split pin into the two ridges of the
wheel so that the spacer stays in place.
6.
Attach the wheel cover.
7.
Insert the foot into the body of the appliance, so that the wheels are in line with the back
of the appliance. (Fig 4 and Fig 1).Fix the foot to the body of the appliance using two cross
head screws.
8.
Ensure that the securing knob (Fig 6) is fully tightened. If the securing knob is not
correctly tightened, a safety switch will be activated in the motor preventing it from
starting.