Alpha Technologies FXM 650, 1100, 2000 UPS - Manual (Page 72)

017-230-B4 Rev B 70
6.5.11 200-event Log
Up to 200 events are stored in the Alpha FXM log. If more than 200 events occur, the oldest is over-written.
Procedure
1. To see the log, type event (all lower case) and press Enter. The events are listed starting with the most
recent and appear as:
See below for details on these
readouts.
eventX=12/25/99 01:45:59 0000000000000000, 0000000000000000, 000
Event Date Time Alarm Fault Mode
Date & Time formats depend
on selected display format
Table N — Event Codes
Code Mode Code Mode Code Mode
000 Standby 003 Boost 1 006 Inverter
001 Line 004 Buck 1 009 Shutdown
002 Boost 2 005 Buck 2 010 Bypass
2. If less than 200 events occurred, the last entry will appear as:
3. To clear the log, type eventclr and press Enter. It takes the Alpha FXM 30 seconds to clear the log. Do not
enter any other commands during this time.
4. To see a specific event, type eventX where X is from 1 to 200 and press Enter. To see a range of events (for
example, events 20 to 30), type eventX-X where X are events from 1 to 200 and press Enter. To clear the
log, type eventclr and press Enter. It takes the Alpha FXM 30 seconds to clear the log. Do not enter any
other commands during this time.
5. To see a specific event, type eventX where X is from 1 to 200 and press Enter. To see a range of events (for
example, events 20 to 30), type eventX-X where X are events from 1 to 200 and press Enter.
Alarm: When the following bits show a 1,
the following alarms are displayed.
Fault: When the following bits show a 1,
the following faults are displayed.
Fan Fail
User Input
AC Battery Open
Self Test
Battery Temperature High
Battery Breaker Open
Keep Alive Failure
UPS Overloaded
Battery Temperature Low
Temperature Probe Unplugged
Battery Voltage Low
Weak Battery
DC Overload
Input Frequency Out of Range
Invalid Software
eventX=00/00/00 00:00:00 0000000000000000, 0000000000000000, 000