Alpha Technologies FXM 650, 1100, 2000 UPS User Manual
Page 73
Advertising
71
017-230-B4 Rev B
Procedure
1. Type default:all and press Enter.
2. Alpha FXM returns *OK as confirmation.
6.5.12 Restoring All Parameters to Default Values
The purpose of this command is to reset the Alpha FXM to the factory default state. See Table D on page 36
for a list of parameters that will be restored to their default values.
CAUTION!
This command resets all parameters that are user-configurable. All previously pro-
grammed operation will be lost. Implement a backup plan for mission critical opera-
tions.
Advertising