Anemostat EST - Manual (Page 6)

6
Unit Labeling
Labels are applied to each terminal as follows:
• Unit specific nameplate showing model number, serial number, manufactured date, and information regarding
controls and heat provided as appropriate.
• The appropriate airflow calibration chart indicating the airflow at varying airflow sensor signals as shown on pages
16 and 17.
• The appropriate wiring/piping diagram for controls provided by Anemostat, as well as directions for field adjusting
the minimum and maximum airflow settings.
• Up arrow indicating the proper orientation of the unit for installation.
• Airflow direction arrow indicating the proper orientation of the duct connections.
• ARI logo indicating the units performance is ARI certified.
• Sheet Metal Workers Union logo indicating unit produced by members of The Sheet Metal Workers Union.
The unit also is shipped with a protective tape over the inlet collar. This tape must be removed prior to connecting the
duct work to the inlet collar.