Atec Agilent-E8364C - Manual (Page 50)

50
Microwave PNA Series
Rear panel
continued
Description Supplemental information
10 MHz reference in
Input frequency
10 MHz ±10 ppm, typ.
Input power –15 to +20 dBm, typ.
Input impedance 200 , nom.
10 MHz reference out
Output frequency
10 MHz ±10 ppm, typ.
Signal type Sine wave, typ.
Output power 10 dB ± 4 dB into 50 , typ.
Output impedance 50 , nom.
Harmonics < -40 dBc, typ.
Test set I/O 25-pin D-sub; available for external test set control
Handler I/O 36-pin, parallel I/O port; all input/output signals are default set to negative logic;
can be reset to positive logic via GPIB command
Auxiliary I/O 25-pin D-sub male connector; analog and digital I/O
Bias tee inputs
Connectors
BNC (f), for port 1 and port 2
Maximum voltage ±40 V DC
Maximum current ±200 mA with no degradation of RF specifications
Fuse 500 mA, bi-pin style
The following connectors/connections are located on the Intel ® 1.1 GHz Pentium ® M CPU
VGA video output 15-pin mini D-Sub; Drives VGA compatible monitors
GPIB Two ports: dedicated controller and dedicated talker/listener 24-pin D-sub
(Type D-24), female; compatible with IEEE-488
USB port 1 port on front panel and 4 ports on rear panel.
LAN 10/100 BaseT Ethernet; 8-pin configuration auto selects between the two data rates