Avision AV3200C User Manual
Page 10
2-3
2.1.2
LOCKING THE SHIPPING SWITCH
Whenever you need to move the scanner to a new
location it is advisable to lock the shipping switch to
avoid causing damage to the scanners’ internal
mechanism. Please follow the instructions below to lock
the shipping switch.
1).
Turn off the scanner.
2).
Lift the Document cover to reveal the flatbed glass
and scanning unit.
3).
Turn on the scanner.
4).
Turn off the scanner again while the scanning
unit moved to the end for a few seconds.
5). Place your scanner in an upright position on its
front side.
6).
Lock your scanner by moving the lock switch on
the bottom of the scanner to the "Locked
position".
7).
Place the scanner back to its normal position.
2.2
SCSI INTERFACE DEVICE ID
When you have several devices on a SCSI chain, you
may need to adjust the SCSI ID selector setting located
on the back of the scanner. This setting assigns a
specific "device ID" to the scanner. If the assignment
conflicts with an existing SCSI device, please select a
new ID. (See Figure 2-2)