Avision AV3200C - Manual (Page 18)

2-11
2.7 CONNECTING THE CABLE
i). Turning the Power Off
Depress the side marked “O” to turn the power off.
Connect the power cable and SCSI signal cable as
shown in Figure 2-7.
ii). Turning the Power On
Depress the side marked “I” to turn the power on.
The POWER LED will light. If not, please check
the power source.
iii). SCSI Termination
The AV3200Ccomes complete with a built in SCSI
terminator. If the scanner is the last device in a SCSI
chain the terminator should be switched on. If the
scanner is not the last device the terminator should be
off. The terminator on/off switch is located on the
back of the scanner, to the left of the SCSI cable
connectors.