Avision AV3200C - Manual (Page 47)

5-1
5.
MAINTAINENCE
5.1 CLEANING THE ADF
The scanner is designed to be maintenance free.
However, it still needs to be cleaned occasionally to
ensure optimum image quality and performance.
From time to time the pad assembly and feeding
rollers may become contaminated with ink, toner
particles or paper dust. In this case the scanner may
not feed documents smoothly or several documents
may feed at once. If this occurs please follow the
cleaning procedures to return your scanner to its
original state.
The cleaning procedures
i). Moisten a cotton swab with isoprophyl alcohol
(95%). (Cleaner kits are available from
PictureVision.)
ii). Carefully open the ADF to the left . Wipe the
feeding rollers by moving the swab from side to
side. Rotate the rollers forward with your finger
and repeat the above cleaning procedures until
the rollers are clean. Be careful not to snag or
damage the pick springs.
iii). Wipe the pad in the direction from top to bottom.
Be careful not to hook the pick springs.
iv). Close the ADF unit. Your scanner is now ready
for use.