Avision AV3200C - Manual (Page 54)

6-3
Question: Paper becomes skewed in the
scanner.
Answer: a) Check the feeding roller
condition; do the cleaning if
necessary.
b) Use the paper guide when feeding
the paper.
Question: When I power on the scanner, it
makes noises and will not stand
ready.
Answer: There are two possibilities:
a) You forgot to remove the shipping
switch from the scanner. Please
remove the shipping retainer first.
b) You did not place the scanner on a
flat desktop surface. This may
cause the scanner to function
improperly.
Question: When I power on the scanner, the
lamp does not light.
Answer: The possibilities are as follows:
a) The lamp is out of order. In that
case, contact your authorized local
dealer to change the lamp. The life
time of the lamp is about 5000 hours.
b) Check whether the power LED on
ADF cover steadily lights or not.
If it flashes, the power adapter
malfunctions or the main board is
short-circuited.
Contact your authorized local dealer to
replace the power adapter or main
board.