Avision AV3200C User Manual
Page 56
Advertising
6-5
Question: The scanned image always comes
out to be too dark.
Answer:
a) Use your application to
modify the Gamma setting to
2.2 and 1.8 for your printer and
monitor respectively.
b) Use Brightness setting from the
TWAIN user interface to get a
brighter image.
Question: The scanner works well otherwise,
but for the line art, the lines scanned
seem much thicker than those of the
original.
Answer: Use the Brightness or Threshold
setting to adjust the line art image.
6.2
PAPER JAM IN THE ADF
In the event of paper jam, please follow the procedures
below.
i).
Open the ADF cover as shown in Figure 7-1.
ii).
Pull the paper out of the ADF unit carefully.
Advertising