5 connecting the cable – Avision AV8000S User Manual
Page 14
Advertising
2-7
2.5
CONNECTING THE CABLE
i).
Turning the Power Off
Follow the following picture to connect the power cable.
Depress the side marked “0” to turn the power off.
ii).
Turning the Power On
Depress the side marked “I” to turn the power on.
The POWER LED will light. If not, please check the
power source.
iii)
SCSI Card Connector
There are two SCSI connectors available. One is for
connecting to your PC and the other is to connect to the
scanner. Follow the following picture to connect the
SCSI cables.
To
Power
To SCSI
connector
Advertising