Avision AV8000S - Manual (Page 57)

10-4
10.4 REPLACING ADF FEEDING
MODULE
After scanning approximately 20,000 pages
through the ADF, the separation pad may be worn out
and you may experience problems with document
feeding. In this case, it is highly recommended to
replace the pad module with a new one. For ordering
the pad module, please consult your nearest dealer and
follow the procedure below to replace it.
Disassembling Procedure
1. Open the ADF cover.
2. Remove the ADF snap-in pad module by pulling out
the upper part of the pad clamp as shown in Figure
6-3.
Removing the pad
Upper Part of ADF Pad Clamp