Kaiser С вертикальной загрузкой - Manual (Page 6)

2
1
INSTALLATION INSTRUCTIONS
The machine can be installed anywhere, provided the
temperature in the place of installation is not below +3º
C and the cables and hoses at the rear of the machine
are not crushed in any way.
•
•
• For transport purposes the moving pieces are
blocked using 2 or 4 screws (depends on model)
4. Remove all this screws and spacers before
starting the machine (as on fig. 5). Keep it for use
in case of a possible transportation.
• Close each hole with the supplied plugs 6 which
can be found in the bag containing the
documents.
• Open the top cover 7 and remove the polystyrene
spacers 8 and 9.
• Use the machine’s manoeuvrable wheel 10 for
the positioning. To release the wheel, move the
arm 11 located on the bottom right over to the left.
After the machine has been located, return the
arm to its original position.
Levelling the washing machine
• After selecting a suitable position, level the
machine carefully using the adjustable feet 12.
• Particular care must be taken when selecting the
position, levelling the washing machine and
ensuring the safety of lock nuts 13.
If levelling is not carried out correctly, the washing
machine will be unstable and noisy during operation,
which may result in damage.
If the machine stands on a carpet floor, make sure that
air can circulate freely between the washing machine
and the floor itself.
Remove the external packaging then lift the
washing machine to remove the polystyrene
base 1 with the plastic spacers.
Incline the washing machine and extract two
internal polystyrene corner pieces (if present) by
pulling the two cardboard strips, first 2 then 3.
6
EN
3
7
4
5
6
8
9
10
11
12
13
IMPORTANT!
Keep this brochure safe for further
using.
Before connecting the appliance
read these instructions carefully. Repairing the
failure arising from inappropriate connections or
use of the appliance is not covered by the
guarantee.