Avision @V2100 - Manual (Page 18)

Getting Started 1-10
Pre Installation Information
The @V2100 has to be setup properly on your network to perform email
and filing functions. The following network parameters have to be set.
For required information and LAN connection, please contact your network
administrator.
Important !
Make a copy of the following table and ask your Network Administrator
to complete the information.
1. IP Address: . . .
2. Subnet Mask: . . .
3. Gateway IP: . . .
4. SMTP Server: . . .
5. Filing Server: . . .
6. NTP Server: . . .
Note: “*” requests an IP address you must fill.
Explanation of contents:
1. *IP Address: The Internet Protocol (IP) address assigned to
your machine by your network administrator.
2. Net Mask:
The net mask address assigned by your network
administrator.
3. Gateway IP: The gateway IP address assigned by your network
administrator.
4. *SMTP Server: The IP address of your SMTP Mail Server assigned
by your network administrator.
5. Filing Server: The IP address of your filing server.(so far
unavailable)
6. NTP Server: The IP address of your *NTP server.