Avision @V2100 - Manual (Page 30)

@V2100 User’s Manual Setting up Your Machine 2-9
Setting up Your Network Parameters
Before using the @V2100, please setup the @V2100 properly on your
network to perform email and filing functions. The following network
parameters have to be set. For required information and LAN connection,
please contact your network administrator.
To set up the network parameters via the control panel,
1. After turning on the @V2100, press the Menu button and then the
Network Configuration item to prompt the Network
Configuration screen (see below) in the LCD-display.
1. IP Address: . . .
2. Net Mask: . . .
3. Gateway IP: . . .
4. SMTP Server: . . .
5. Filing Server: . . .
6. *NTP Server: . . .
7. Save & Exit:
8. Exit:
The Network Parameter Settings
2. Consult your network administrator for the network parameters and
enter them respectively.
3.
Use the q key to scroll the Save & Exit menu and press the Select
button to save your setting.