Avision @V2100 - Manual (Page 24)

@V2100 User’s Manual Setting up Your Machine 2-3
Unlocking the Scan Unit
The scan unit is locked during transport to protect the scanning mechanism
from being damaged.
Be sure to unlock the scan unit before using the
machine.
1). Locate the lock switch underneath
the machine.
2). Move the lock switch to the
"unlocked position" .
Note:
If you need to move your @V2100 for repair or any other reason, be
sure to lock your @V2100 before moving. To lock your @V2100, please
do the following,
1. Turn off your @V2100.
2. If the scanning head is not located at the front of the glass, turn the
@V2100 on to return the scanning head to the front of the glass.
After the scanning head is returned to the home position, turn the
power supply off.
3. Move the lock switch to the “Locked Position”.
“Unlocked Position”
“Locked Position”