Avision @V2100 User Manual
Page 19
Advertising
@V2100 User’s Manual Getting Started 1-11
1. *IP Address: An IP (Internet Protocol) address uniquely identifies
a host connection to an IP network. System administrator or
network designer assigns the IP address. The IP address consists
of two parts, one identifying the network and the one identifying
your node.
The IP address is usually written as four numbers separated by
periods. Each number can be zero to 255. For example,
10.1.30.186 could be an IP address.
2. *SMTP: Stands for Simple Mail Transfer Protocol. It is the main
communication protocol used to send and receive email on the
Internet.
3. *NTP: Stands for Network Time Protocol. It is the main time
protocol used on internet.
Note:
Advertising