Brickcom Software Users Manual For Firmware release V3.2.x.x - Manual (Page 20)

19
RTSP Server
To utilize RTSP authentication, the user must first set a password for the camera.
RTSP (Real-Time Streaming Protocol) controls the delivery of streaming media. By
default the port number is set to 554.
Authentication - Depending on the network security requirements, the camera provides
two types of security settings for streaming via RTSP protocol: NONE and DIGEST.
If DIGEST authentication is selected, user credentials are encrypted using MD5
algorithm, thus providing better protection against unauthorized access.
RTP/RTCP-
RTCP without SR - RTCP without SR (Sender Report) is the default option. Under
this option, audio and video received from the IP camera are played immediately and
independent of each other.
RTCP with SR - RTCP with SR option allows synchronization between video and
audio on live viewing. Choose this option if audio and video become unsynchronized.
Click Apply to apply settings or Cancel to cancel changes.
Audio
The administrator can set up two separate streams for the camera for different viewing
devices. The administrator can enable or disable the audio function on either stream. If
audio enable is selected, select the Audio codec from the drop-down menu.