Brickcom Software Users Manual For Firmware release V3.2.x.x - Manual (Page 26)

- 25 -
Patrol Settings
The camera can be set to patrol a group of preset points. For each patrol group, the user
can configure the preset point order, movement speed, and viewing duration.
To create a patrol group:
a. Click on Add and enter a descriptive name in Description.
b. Add preset points to the patrol group by clicking the next to the desired preset point.
c. Use the arrow buttons to change the order of the preset positions by using the Adjust the
sequence of positions, and enter Movement Speed and Viewing Duration for each preset
point.
d. Click on Apply to save the patrol group.
e. Enable a patrol set by clicking on Start/Stop.
NOTE
1. A total of sixteen preset points can be assigned to a patrol group.
2. A total of four patrol groups can be assigned to a network camera.