Led light – Brickcom Software Users Manual For Firmware release V3.2.x.x User Manual
Page 58
Advertising
- 57 -
LED Light
Mode
– Select “Keep active during event” or “Keep active for” a specific amount of time when an
event is triggered.
LED Control - The LED on the front of the camera can be set to flash at a configurable interval
when an event is triggered. From the Activate drop down menu, select a percentage which
the LED will brighten to. When the LED reaches the selected percentage, it can be configure
to fade to off or turn off. Select the option from the Inactive menu.
Click Apply to apply settings or Cancel to cancel changes.
Advertising