Brickcom Software Users Manual For Firmware release V3.2.x.x - Manual (Page 24)

23
Camera Control
Preset Point
A preset position is a pre-defined camera view that can be used to quickly move the
camera view to a specific location. To create a preset position:
a. Use the Pan, Tilt and Zoom (PTZ) controls to steer the camera view to the
required position.
b. Enter a descriptive name under Current Position and click Add.
c. The camera position and focus settings will be saved as a preset position.
NOTE – A total of sixteen preset points can be set.
a. Preset Positions can be assumed at any time by selecting the preset position's
name from the available positions drop-down list. One position can be set as the
Home position, which is readily accessible by clicking the Home button in the PTZ
panel.
NOTE - The name of the preset point set as Home will have (H) added; for
example, Gate (H).
b. The camera can be configured to return to the Home position when the camera
has been inactive for a specified length of time. Select the desired length of time from
the drop-down menu and click Apply. Setting the time to zero prevents the camera
from automatically returning to the Home position.