Brickcom Software Users Manual For Firmware release V3.2.x.x - Manual (Page 70)

- 69 -
Firmware Upgrade
This feature allows the user to upgrade the camera firmware. It will take a few minutes to
complete the process.
NOTE - Do not power off the camera or camera during the upgrade.
Upgrade - Click
Browse… and specify the firmware file. Click Upgrade. The camera will
begin upgrading and will reboot automatically when the upgrade is finished.
The following message will show during the firmware upgrading process.
Configuration
This feature allows the user to export/import the configuration files of the network camera.
Import/Export - Click export to pop up a dialog to indicate the location and file to export.
Click browse to indicate the location and file of the camera configuration and click import
to import the configuration file back into the network camera.