Brickcom BRC-64 - Manual (Page 15)

Launch EasyConfig
User can search cameras by EasyConfig and configure the settings below:

IP address configuration.
 Easylink configuration.
 Live view & Individual Camera Modification.
 BRC64.
To launch EasyConfig, select EasyConfig from the start menu. If Complete Setup type
was selected in the software installation, an EasyConfig icon would have appeared on
the desktop. Double click to open the icon.
If Custom Setup type was selected in the software installation and an EasyConfig icon
does not appear on the desktop, the program would have been installed under
‘C:\Program Files\Brickcom\EasyConfig’ unless the program was saved to a preferred
directory.
NOTE - Check <Skip the hardware installation guide> to skip
checking the hardware connection. To check the hardware installation
settings, do not check the box.
15 15