Brickcom BRC-64 - Manual (Page 22)

1. For first time use, the user name and password are assigned as ‘
admin/admin’. Click <OK> to login.
NOTE1
Check <Save user name and password> to automatically login when
the BRC64 starts.
NOTE2
Windows only allow administrator account to edit the system folders.
As the result, BRC64 fails to start the service if certain condition is
satisfied:
1. User is unable to edit the system folder.
2. BRC64 is installed in default path.
For the purpose to implement BRC64 normally, please request administrator to carry out
the following steps:
WINXP
22 22