Brickcom BRC-64 - Manual (Page 94)

3.2 Select the <User List> to decide the level status of new account.
Then set up username & password. Finally modify permission for
each function. Click
button to finish the setting.
4. Click button to apply the setting or return to default setting
by selecting button.
NOTE
If the user is unable to use NVS service, please contact higher levels
status account to enable this function.
Auto Login
For the easy-to-use, BRC64 supports the following functions:
 Start BRC64 automatically when Windows begins.
 Start live-view when BRC64 opens.
 Auto Login.
 Set the Auto Reboot into Schedule.
 Note
If your system device is Windows Vista or Windows 7, please close the UAC
function to avoid unnecessary errors. Please refer to the below steps:
94 94