Brickcom BRC-64 User Manual
Page 65
the snapshot frequency per notification.
4.2.1.1
Users can modify Digital Input Event service and Camera status by hot-
key such as F5，F6，F7，F8，Ctrl+F5，Ctrl+F6，Ctrl+F7，and Ctrl+F8.
Alarm for Digital Input Event Service will trigger if the status between
external device attached to the camera and that of the camera is the
same. The following steps are how to get the digital input status of
camera.
Hotkey Description
F2
Enable all Record
F3
Enable all MD Record
F4
Disable all Record
F5
Set selected camera DI Status to Low
F6
Set selected camera DI Status to High
F7
Set all cameras DI Status to Low
F8
Set all cameras DI Status to High
Ctrl+F5 Set selected camera DI detection disable
Ctrl+F6 Set selected camera DI detection enable
Ctrl+F7 Set all cameras DI detection disable
Ctrl+F8 Set all cameras DI detection enable
F9
Show DI Status in Video Frame(10 Sec)
4.2.1.2
Click the <Live View> button to connect the setting dialog page for
camera via the path “Setting
→
Settings
→
Cameras.”
65
65