Brickcom BRC-64 User Manual
Page 19
Advertising
5.1
If <Set IP Address configuration manually> is selected, the above
pages will be displayed.
6.
If the camera supports the EasyLink
TM
function, the above page
will be displayed. Otherwise, this page will not be shown. *If
desired, click <Skip> to skip this setting. EasyLink
TM
is a unique
Brickcom function which allows users to assign a unique EasyLink
name to their network camera’s IP address. There is no need to
configure the router to open up ports or remember hard-to-
memorize IP addresses. Users can log onto
[uniqueEasyLinkname].mybrickcom.com to view the camera’s web
GUI and live view.
Enter a unique EasyLink name whose length must be
between 5-32 characters.
19
19
Advertising