Camco D-Power 4 - Manual (Page 11)

2 F
A
CILITIES
USER MANUAL
D - P O W E R S E R I E S P. 0
D - P O W E R
S E R I E S
2.3 Factory Settings
D-POWER amplifiers are delivered with the following factory settings
Front panel:
7 Volume Control Channel A The volume is set to minimum.
8 Volume Control Channel B The volume is set to minimum.
 On/Off Switch The amplifier is switched off.
Rear panel:
2 Input Ground Lift Grounded
3 High Pass Filter B Off
4 Mode Selector Stereo
5 Gain Selector 32 dB
6 High Pass Filter A Off
7 Clip Limiter Off
Make sure that the switches are set to the configuration needed for each
particular application.
For more detailed information, see sections 3.5, 3.6, 3.7 and 4.1.