Camco D-Power 4 - Manual (Page 33)

0
M
A
IN
TE
N
A
N
C
E
IN
FO
RM
AT
IO
N
/

D
EC
O
M
M
IS
IO
N
IN
G
USER MANUAL
D - P O W E R S E R I E S P. 32
D - P O W E R
S E R I E S
0 Maintenance Information
Cleaning and servicing work on the inside of the amplifier must only be carried
out by qualified personnel.
Qualified personnel is defined as a person who has gained specialised relevant
knowledge of electronic engineering through education, training and experi-
ence and who has sufficient knowledge of all relevant governmental work
safety regulations to be in a position to judge the safe functioning of power
amplifiers based on technical rules according to IEC 60065.
(IEC 60065 (DIN EN 60065) “Safety Requirements for Audio, Video or similar Elec-
tronic Appliances”)
In order to guarantee the safe functioning of the amplifier, it has to be checked
regularly depending on its application but at least once a year by a properly
qualified person.
Advice on how to carry out these checks can be found in DIN VDE 0702- “Safety
Checks for Electronic Appliances” .
An amplifier that is considered to be unsafe must be labelled accordingly and
stored in a safe place to prevent this amplifier being used mistakenly.
For details on removal and cleaning of the front filter refer to section 4.7.
 Decommissioning
During the decommissioning process of the amplifier, all legally prescribed rules
and procedures must be adhered to.