Camco D-Power 4 - Manual (Page 22)


2
3
4 OPER
ATION
USER MANUAL
D - P O W E R S E R I E S P. 2
D - P O W E R
S E R I E S
D-POWER Filter Assembly
 Foam Filter
2 Front Frame
3 Screw
4.7 Filter Cleaning
The air intake on the front of your D-POWER Amplifier is fitted with a removable
filter system. If the filter becomes clogged, the unit will not cool as efficiently as
it should and may result in reduced output levels.
WARNING: Disconnect the amplifier from the mains before removing the
front frame.
WARNING: Turn off the amplifier before removing the front frame.
To clean or replace the filter just slightly unscrew the fixing screw with the help
of a 3 mm allen key. The screw will be held back by a small plastic spacer on the
back of the frame to avoid losing it. Then shift the front frame slightly to the
right. Then you should be able to remove the frame from the amplifier com-
pletely (pull gently to avoid any bending of the front frame).