I-View FAC – 500 FingerKey Access Controller DVR - Manual (Page 37)

36
To add a group name in the system.
Step4: Please press “User Manage” ( ) button to set and add enrolling administrator.
Please check the Enable Box, or
enrolling user can not access the
FingerKey system.
Finger 3.2 – 4: Setup user management
Section Description:
ID: Select one ID number from 0001 to 0500 for an enrolling user.
Enable: To enable or disable access of the registered user.
User Name: Fill out the enrolling user’s name.
Password: Fill out the enrolling user’s password.
Privilege: Select an authority level from normal user to Super Admin for the enrolling user.
Group: Select a group name for the enrolling user.
From: Select the connected FingerKey Device’s location.
Read Finger Data: Press this button to receive the enrolling user’s fingerprint data from the
connected FingerKey device after fill out the information above.
FingerData: A reference for showing if the fingerprint data has been received.
Function Keys:
To exit this section.