I-View FAC – 500 FingerKey Access Controller DVR - Manual (Page 74)

73
attendance logs, while the setting number has been reached, the system will trigger the
alarm. The number range of counting supervisor logs is from 0 to 99.
ReCheck Min: Rechecking time, this function is to set within specific minutes, no
matter how many times a user accesses the FingerKey system, the system will only
save the first access time in log.
Function Keys:
Confirm Key: To confirm the present operation.
Cancel Key: To cancel the present operation.
Selection Keys: To select the selections.
4.3.5. Access Options
4.3.5.1. Define TP
Define Time Plan, this function is to schedule a time scale for registered users access the
FingerKey for a week. Whole system can be set maximum 50 time plans. Each registered
user can be set with maximum three of time planes. If the End-time is set less than
start-time (23:57-23:56), the access will be forbad all day. However, setting as (00:00-23:59)
represents to access all day.
Note: System defaults that time plane of serial number 1 is all-day open (i.e. new
registered user default can unlock door).
Function Path: Menu Options Access Options Define TP
Example of Define TP setting:
(1). Please use number keys and buttons to set or selection the
Time Plan number, and press button to continue.