I-View FAC – 500 FingerKey Access Controller DVR - Manual (Page 73)

72
2.2.7 Set up FingerKey System IP Address on page 23.
Net Speed: Network speed, the default network speed is 10M-F.
Ethernet: To set if open Ethernet communication.
RS232: To set if open RS232 communication.
RS485: To set if open RS485 communication.
Warning: RS485 communication in the outdoor environment, the lightening
protection device is required.
COMM Key: the default system keyword is 0; user may need to define it.
Function Keys:
Confirm Key: To confirm the present operation.
Cancel Key: To cancel the present operation.
Selection Keys: To select the selections.
4.3.4. Log Opt (Log Options)
Function Path: Menu Options Log Opt
Function Description:
Alm SuperLog: Supervisor Log Alarm, FingerKey will count the setting number of
supervisor logs, while the setting number has been reached, the system will trigger the
alarm. The number range of counting supervisor logs is from 0 to 99.
Alm AttLog: Attendance Log alarm, FingerKey will count the setting number of