I-View FAC – 500 FingerKey Access Controller DVR - Manual (Page 96)

95
2). Click the “Set up Access Controller” button to enter the Access Controller
setting dialog.
“Set up Access Controller” Function Description:
Fingerkey: To select a FingerKey device.
` Enable FingerKey: To enbable or disable a FingerKey.
Set up Schedule: To set up monitoring schedule of the FingerKey.
Event Selection:
1). Trigger: To set the actions of the Witness while the FingerKey has been
triggered.
2). Verify Fail: To set the actions of the Witness while the FingerKey verify
fail.
3). Verify OK: To set the actions of the Witness while the FingerKey verify
success.
4). Disconnect: To set the actions of the Witness while the FingerKey has been
disconnected.
5). Door Open: To set the actions of the Witness while the door is open.
Actions to take when triggered:
Pop up Video window: To enable about if the Witness will pop up video
window while the event has been triggered.
Enable Recording: To enable about if the Witness will start recording
with the “Selection camera” setting while the event has been triggered.
Enable Snapshot: To enable about if the Witness will implement a
snapshot with the “Selection camera” setting while the event has been
triggered.