I-View FAC – 500 FingerKey Access Controller DVR - Manual (Page 40)

39
2). Enroll the user in EzFingerKey program (FingerKey PC software)
Step1: Please open the EzFingerKey program from PC (Double click the EzfingerKey.exe
icon).
Step2: Press button and type the login name and password to login the system.
Finger 3.3 – 1: Login password dialog
NOTE: To Set up or change the login name and password, please refer to the section 2.3.1
EzFingerKey Login Password Setting on page 25.
Step3: Please press the “Fingerprint Device” button ( ) to check and make sure the
FingerKey device has been added in the EzFingerKey system.
Finger 3.3 – 2: Please check if the FingerKey device is on the list.
The display window lists the
connected FingerKey devices
information.