Castle TSM-35 Operator Manual - Manual (Page 5)

CASTLE, INC TSM-35 OWNERS MANUAL V1.2 Page 5 of 33
2 Machine Safety
This machine was carefully prepared for shipment at our factory. Upon receipt of the machine,
inspect for shipping damage. Report any damage IMMEDIATELY to the freight company, your
Castle dealer and to Castle, Inc. DO NOT attempt to operate the machine if you observe any
physical damage. Please contact Castle, Inc. at 800-282-8338 for instructions.
2.1 Safety Rules
The Castle Model TSM-35 Pocket Machine was designed with operator safety as a priority,
which is why Castle highly recommends the following:
1. Always use a qualified electrician in hard wiring your machine to 3-phase electrical
power.
2. Do not electrically wire machine until ready to operate.
3. Always wear eye protection when operating or servicing mechanical equipment.
4. Always wear hearing protection when the machine is in operation.
5. Always check for proper tooling tightness prior to use.
6. Do not at any time put hand under the clamp guard, in the path of router bit or drill bit.
7. Familiarize yourself with the clamping action, routing and drilling functions of the ma-
chine before electrically wiring the machine to any 3-phase electrical power supply.
8. Double check the tag on the electrical box of your machine to be sure it reads the
proper 3-phase voltage that you are using with your machine.
9. NEVER ALLOW MACHINE TO GET WET OR BE USED IN A WET ENVIRONMENT.