American Dish Service Vision C3 - Manual (Page 35)

This information has to be entered for each of the four
transponder categories:
• vertical high • vertical low
• horizontal high • horizontal low
or
• right • left
TracVision C3 requires that the data fields for all four
transponder categories be provided. If the selected satellite does
not have information for one or more of the transponder
categories, default information should be entered in the fields as
follows:
Transponder Data Default Value
Frequency 00000
Symbol Rate 27500
FEC Code the same value as provided for those
transponders with data
Network ID 0x0000
Polarity and Band whichever combinations are not
already provided
After entering this information, it is necessary to save these
settings. To do so, type:
@SAVE,A (or @SAVE,B if data is for User2 satellite)
@DEBUGOFF
After completing this process, restart the system by either cycling
power or typing ZAP .
One of your user-defined satellite options has now been added to
the TracVision C3 satellite library. This option will now be
available the next time the SATINSTALL command is given.
2-21
Installation
54-0159 Rev. G
Table 2-6
Default Transponder Values