Antex Electronics SX-5e - Manual (Page 49)

44
Clicking on “Options” will open the following window:
Figure 19. Antex Meter options
“Visible Lines” allows you to select which devices have VU meters
displayed.
“Mode” allows you to select whether the meter is peak reading or
averaging (VU).
“Peak Hold Level” will keep the peak level lit for the time indicated.
“Headroom Indicator” determines where the 0dB point is. The
default of zero sets the 0dB point equal to the digital clipping level.
“Set Clip Level Indicator At” shows how many dB below digital
clipping the “clip” indicator will come on.