About digital audio – Antex Electronics SX-5e User Manual

Page 59

Advertising
background image

54

SX-5e:

THD+N ....................................................................................02%

Dynamic Range ............................................................... 85dB min

Line Out level .....................................................................2VRMS

Line Out output impedance............................................... 50 ohms

Line Out load impedance........................................... 2K ohms min

About Digital Audio

In professional circles, digital audio has been with us for over 10
years. With the advent of the compact disk in 1983, digital audio
has become commonplace as a consumer item. Few will argue
that digital audio has afforded an order of magnitude improvement
in overall sound quality and signal-to-noise ratio over the best
analog systems which preceded them. But just what is digital
audio, and where and how is it used?

It is possible to use digital data transmission techniques to trans-
mit digital audio signals by wire or radio. However, this practice
has not yet become common due to the extremely wide signal
bandwidth required to transmit real-time digital audio signals. For
the present, digital audio techniques seem largely confined to the
recording and playback of music and other audio signals where, in
a few short years, digital audio technology has all but replaced the
previous analog record/playback techniques. In the present dec-
ade we will see digital audio technology replace analog technol-
ogy in most signal processing functions in both the professional
and consumer markets. It is also likely, particularly with the advent
of fiber optic cables, that digital audio technology will be utilized in
the transmission of real-time audio signals on a widespread basis.

But what is digital audio?

Advertising
This manual is related to the following products: