ADT Security Services 3000 - Manual (Page 10)

– 10 –
)XQFWLRQVRIWKH7RXFKSDGV
1. DISPLAY WINDOW.
Custom English Display Touchpads: 2-
line, 32-character Liquid Crystal Display
(LCD) touchpads that display protection point
identification, system status, and messages.
English Display Touchpads: Display
protection zone ID and system status
messages using pre-designated words in the
LCD display.
2. 1 OFF Disarms burglary portion of the
system, silences alarms and audible trouble
indicators, and clears visual display after
problem's correction.
3. 2 AWAY Arms the entire burglary system,
perimeter and interior.
4. 3 STAY Arms perimeter portion of burglary
system only. Interior protection is not armed,
allowing movement within premises
without causing an alarm.
5. 4 This is not a Function key. Used
only as a numeric key.
6. 5 TEST
Tests the system and alarm
sounder if disarmed. Refer to Testing The
System section for test procedures.
7. 6 BYPASS
Removes individual protection
zones from being monitored by the system.
8. 7 INSTANT Arms in manner similar to the
STAY mode, but without the entry delay
feature. Entering via an entry/exit door will
cause an instant alarm.
9. 8 CODE Used to assign additional user
codes for other users of the system.
10. 9 CHIME Turns CHIME mode on and off.
When on, the opening of windows or doors
while the system is disarmed will sound 3
beeps at the touchpad(s).
11. ✱
READY
Used to display all open protection
zones.
12. # This key can be used for "Quick
Arming" of the system without use of a
security code (if programmed).
13. KEYS 0–9†: Used to enter your security
code(s).
14. READY INDICATOR: (GREEN) Lit when
the system is ready to be armed (no faults
present). While the system is disarmed, this
indicator will go on and off as protection
zones are closed and opened.
15. ARMED INDICATOR: (RED) Lit when the
system has been armed.
16. INTERNAL SOUNDER: The built-in
sounder mimics the alarm sounder during
alarms, and will also "beep" during certain
system functions.
17. FUNCTION KEYS: Keys A, B, C, D may
have been programmed for a variety of
functions, including panic (emergency)
functions. For details, see the Function Keys
section.
† Note: Keys
1 OFF through 3 STAY and 2 AWAY through 7 INSTANT each perform their
associated companion system functions (OFF, STAY, AWAY, INSTANT, etc.) when
preceded by an entry of the security code (as described later).