ADT Security Services 3000 - Manual (Page 7)

– 7 –
6\VWHP2YHUYLHZ &RQWLQXHG
Phone Access
•
If included, a phone module permits you to access the system via a touch-tone
phone, either on-premises or by call-in when away.
•
You can receive synthesized voice messages over the telephone regarding the
status of the security system.
•
You can arm and disarm the system and perform most function commands
remotely via the telephone, with voice confirmation provided after each command
entry.
•
Complete information regarding the use of this feature is provided in a separate
manual entitled “Phone Access User's Guide” that is supplied with the voice
module.
Paging Feature
•
If programmed, up to four pagers can automatically display certain system
conditions as they occur in your system.
•
The display consists of code numbers that indicate the type of condition that has
occurred.
Function Keys
•
The “A”, “B”, “C”, and “D” keys on the touchpad can be programmed to perform
various functions.
•
Functions include: activate a Panic alarm; arm the system; provide step arming;
switch lights on/off; send a message to a pager; display Time/Date; start a Macro
Scheduling
•
Your system can be programmed to automatically perform certain functions (e.g.,
arm the system) at a predetermined time each day.