ADT Security Services 3000 - Manual (Page 20)

– 20 –
%\SDVVLQJ3URWHFWLRQ=RQHV
4XLFN%\SDVV
If programmed, "Quick Bypass" allows you to easily bypass all open (faulted) zones
without having to enter zone numbers individually. This feature is useful if, for
example, you routinely leave certain windows open when arming at night.
1. + 6 + [#]
(Security Code) BYPASS
In a few moments, all open zones will be displayed
and automatically bypassed.
Make sure that only those
zones that you wish to leave unprotected are bypassed, and
that there are no other zones unintentionally left open.
(-7%61)(  46)77
 83 7,3; *%9087
English Display:
NOT READY
2. Wait for all bypassed zones to be displayed, then arm
the system as desired.
(-7%61)( &=4%77
6)%(= 83 %61
English Display: BYPASS
Ask your installer if "Quick Bypass" is active for your system, and if so, check here:
&KLPH0RGH
CHIME mode alerts you to the opening of a perimeter door or window while the
system is disarmed.
When Chime mode is activated:
•
Three tones sound at the touchpad whenever a perimeter door or window is opened.
•
Interior zones do not produce a tone when they are faulted.
•
Pressing the READY key will display the open protection points.
•
Chime mode can be used only while the system is disarmed.
To turn Chime Mode on:
+ 9
(Security Code) CHIME
The CHIME message will appear. Perimeter zones
will cause a tone when faulted.
(-7%61)(
6)%(= 83 %61
English Display: READY
To turn Chime Mode off:
+ 9 again
(Security Code) CHIME
The CHIME message will disappear.
(-7%61)( ',-1)
6)%(= 83 %61
English Display: CHIME