CEMB USA N100 - Manual (Page 17)

General overview 2 - 5
The position to open can be selected using the and arrows, then the
additional functions bar must be displayed and one of the following operations must be
selected:
-
save the measurement performed.
The current date and time are automatically used to identify the data
recorded.
Note:
If the position selected is already in use, before saving the data the symbol
asks the operator to confirm that the data should be overwritten. Press to
confirm; the key interrupts the saving procedure and another position can
be selected.
- load the measurement selected.
Loading data from the records allows the user to view results saved
previously in a relevant screen, described in 5-9 Displaying
measurements from the records.
-
delete the measurement selected, emptying the relative position in the
records.
- delete all of the measurements, emptying the records completely.
Note:
Before deleting data from the records, the symbol asks the operator to
confirm the operation, which will result in the data being deleted definitively. Press
the key to confirm; with , the data will not be deleted.
Note:
The and keys, which respectively increase and decrease the position
selected by 3, can be used to scroll through the records quickly.