CEMB USA N100 - Manual (Page 49)

CEMB N-Pro program (optional) 7 - 13
Note: To assist users, the CEMB N-Pro program includes some example templates
that can be used as a base to create customised reports. These models are located in
the sub-folder named Report Templates in the N-Pro directory in which the program
is installed.
Warning: If you wish to customise one of the templates present in the Report
Templates folder, it is best to save the edited model with another name or in a
different folder. This is because subsequent N-Pro software updates will overwrite
the templates distributed by CEMB with the program.
Note :
The list of codes that can be used in the templates and their meanings, and some
suggestions for the creation of customised certificates, are given in Appendix D.
Generating and printing multiple measurement certificates
(
multi-report )
From version 1.3, CEMB N-Pro software allows you to create and print customised
certificates containing different measurement and balancing data with extreme ease. This
means a series of measurements taken at subsequent times, even for different points of
different machines, can be grouped together in a single document.
The certificate can be fully customised thanks to the extension of the template concept:.
Predefined codes for multi-reports are composed of two parts:
• the code related to the information to be replaced (identical to a single
measurement report)
• the sequential number of the measurement to which the code refers
The steps for generating a multi-report are very simple:
1. use ‘CTRL + click’ or ‘SHIFT + click’ to select measurements from the data
records to be included in the multi-report, which must be contained in a single folder
2. press the button
3. select the desired template
Note: The description, list and meaning of codes that can be used in multi-report
templates are shown in Appendix D.